# Saulės modulių montavimo elementai

## Products
- [Goomax rail connector](https://jardis.lt/en/goomax-rail-connector.md): AL6005-T5 aluminium Goomax rail-splice connector for joining photovoltaic mounting rails into a continuous row.
- [Novotegra flat roof middle module clamp 30-42](https://jardis.lt/en/novotegra-flat-roof-middle-module-clamp-30-42.md): Novotegra 03-000324 is a middle clamp for flat-roof solar mounting systems and modules with 30–42 mm frame heights. It secures two adjacent modules to the mounting rail.
- [Goomax flat roof aluminum rail 5.5m](https://jardis.lt/en/goomax-flat-roof-aluminum-rail-55m.md): Goomax KG5 – 5.5 m aluminum rail for flat roof solar mounting systems. It serves as the structural base for attaching compatible module clamps.
- [Novotegra flat roof end module clamp 30-42](https://jardis.lt/en/novotegra-flat-roof-end-module-clamp-30-42.md): Novotegra 03-000396 is a pre-assembled end clamp for securing a solar module on the long side of its frame in Novotegra Flat Roof systems. It is intended for module-frame heights from 30 to 42 mm.
- [Ballast mounting tubs for solar panels on flat roofs](https://jardis.lt/en/ballast-mounting-tubs-for-solar-panels-on-flat-roofs.md): HDPE mounting trays for installing solar modules on a flat roof at a 15° angle. They form part of a ballasted mounting solution designed to avoid roof penetration.
- [Goomax hanger bolt M10x180mm](https://jardis.lt/en/goomax-hanger-bolt-m10x180mm.md): Goomax M10 × 180 mm A2 stainless-steel hanger bolt with an EPDM sealing washer. It is intended for connecting solar mounting systems to timber roof structures.
- [Goomax mid clamp for solar modules 30 mm, black](https://jardis.lt/en/goomax-mid-clamp-for-solar-modules-30-mm-black.md): Goomax KG401 is a black mid clamp for securing 30 mm framed solar modules on a compatible mounting rail. The clamp is made from AL6005-T5 aluminium and is intended for use as part of a complete photovoltaic mounting system.
- [Goomax standing seam metal roof clamp](https://jardis.lt/en/goomax-standing-seam-metal-roof-clamp.md): Goomax KG318 is a stainless-steel clamp for mounting solar-system components on a standing-seam metal roof. It is intended for compatible roof seams and mounting-system parts.
- [Goomax trapezoidal mounting rail](https://jardis.lt/en/goomax-trapezoidal-mounting-rail.md): Goomax 400 mm aluminium trapezoidal mounting rail for fixing solar modules to a trapezoidal sheet-metal roof. Its EPDM strip helps seal the rail where it meets the roof covering.
- [Novotegra flat roof lower module bracket 13° 150-30](https://jardis.lt/en/novotegra-flat-roof-lower-module-bracket-13-150-30.md): Novotegra 03-000343 is an aluminium 13° base-foot set for the front module support of Flat Roof System II. It clips into the 150-30 base profile and is used only within a compatible system configuration.
- [Goomax aluminum rail 5.8 m](https://jardis.lt/en/goomax-aluminum-rail-58-m.md): Goomax 5.8 m aluminium mounting rail made from AL6005-T5 alloy for solar-module mounting systems.
- [Novotegra wind deflector 13° 2.35m](https://jardis.lt/en/novotegra-wind-deflector-13-235m.md): Novotegra 03-001439 is a 2.35 m aluminium wind deflector for a 13° closed flat-roof mounting system.
- [Goomax mounting plate for rail connection](https://jardis.lt/en/goomax-mounting-plate-for-rail-connection.md): Goomax stainless-steel mounting plate for fastening solar-module rails to compatible roof hooks or mounting supports. A small connecting component for a rail-based photovoltaic mounting system.
- [Goomax self-tapping screw with sealing rubber](https://jardis.lt/en/goomax-self-tapping-screw-with-sealing-rubber.md): Goomax self-drilling screw with an EPDM sealing washer for fastening solar-mounting components to sheet-metal roofs.
- [Novotegra mounting screw 5.5 for flat roofs](https://jardis.lt/en/novotegra-mounting-screw-55-for-flat-roofs.md): Novotegra 03-000383 is a 5.5 mm stainless-steel fastening screw for compatible flat-roof photovoltaic mounting components. It is intended for the mechanical fixing of the relevant mounting-system parts.
- [Goomax flat roof rear leg](https://jardis.lt/en/goomax-flat-roof-rear-leg.md): Goomax KG307 is a rear support leg for a flat-roof photovoltaic mounting structure. It is made from AL6005-T5 aluminium and is used as one component of a compatible system design.
- [Goomax flat roof front leg](https://jardis.lt/en/goomax-flat-roof-front-leg.md): Goomax front support leg for a flat-roof solar mounting system. The AL6005-T5 aluminium component is used to form the module support in the selected mounting layout.
- [Goomax hanger bolt M10x200mm](https://jardis.lt/en/goomax-hanger-bolt-m10x200mm.md): Goomax M10 × 200 mm hanger bolt for timber structures, made of A2 stainless steel. Its EPDM sealing washer helps create a weather-tight fixing point through the roof covering.
- [Goomax aluminum rail end cap, black](https://jardis.lt/en/goomax-aluminum-rail-end-cap-black.md): This black Goomax end cap closes the open end of a compatible aluminium mounting rail. The UV-resistant plastic finish gives the rail a neat appearance and protects the exposed rail end.
- [Novotegra flat roof top module bracket 13° 150-30](https://jardis.lt/en/novotegra-flat-roof-top-module-bracket-13-150-30.md): Novotegra 03-001243 is a rear module-support set for the 13° Flat Roof II South system. The aluminium component clips into the 150-30 base trough and supports the module and the upper connection of the wind deflector.
- [Novotegra wind deflector 13° 1.95m](https://jardis.lt/en/novotegra-wind-deflector-13-195m.md): Novotegra 03-000309 is a 1.95 m aluminium wind deflector for a 13° closed flat-roof mounting system. It helps reduce wind load on the photovoltaic mounting structure.
- [Novotegra flat roof rail connectors 150-30](https://jardis.lt/en/novotegra-flat-roof-rail-connectors-150-30.md): Novotegra 150-30 connector designed to join compatible flat roof system rails. The aluminum component helps create a longer straight mounting line according to the Novotegra system project.
- [Novotegra expansion joint for flat roof rail 150-30](https://jardis.lt/en/novotegra-expansion-joint-for-flat-roof-rail-150-30.md): Novotegra 150-30 aluminium expansion joint for flat-roof mounting rails. It helps compensate for thermal expansion of rails in longer sections of a mounting structure.
- [Goomax rail bracket for hanger bolt](https://jardis.lt/en/goomax-rail-bracket-for-hanger-bolt.md): Goomax GMMRHLDS07 is a bracket for fixing a solar mounting rail to a hanger bolt. Its AL6005-T5 aluminium and SUS304 stainless-steel construction is designed for reliable rooftop installation.
- [Goomax tile roof hook](https://jardis.lt/en/goomax-tile-roof-hook.md): Goomax KG301 is a SUS304 stainless-steel roof hook for fixing solar mounting rails on tiled roofs. The hook forms a durable connection between the roof structure and the mounting system.
- [Goomax flat roof front leg bracket with nut and bolt](https://jardis.lt/en/goomax-flat-roof-front-leg-bracket-with-nut-and-bolt.md): Goomax KG309 is a front-leg bracket with nut and bolt for compatible flat-roof PV mounting structures. It is made from AL6005-T5 aluminium and stainless steel.
- [Novotegra mounting rail for flat roofs 150-30 mm, with protective layer, 6 m.](https://jardis.lt/en/novotegra-mounting-rail-for-flat-roofs-150-30-mm-with-protective-layer-6-m.md): Novotegra 03-000989 is a 6 m aluminium base trough for flat-roof mounting systems I and II, supplied with a continuous 6 mm PE protection layer. It provides a base for compatible feet, module supports or profiles and for accommodating ballast in the designed system.
- [Goomax end clamp for solar modules 30 mm, black](https://jardis.lt/en/goomax-end-clamp-for-solar-modules-30-mm-black.md): Goomax KG402 – black end clamp for solar module frames with a height of 30 mm. Aluminum component designed to secure the end of a module row to a compatible mounting system.

---
Canonical HTML: https://jardis.lt/en/mounting-structures/saules-moduliu-montavimo-elementai