Deye set 12 kW hybrid inverter + 16 kW energy storage

This Deye 12 kW hybrid inverter and 16 kWh energy storage set is a high-efficiency, single-manufacturer ecosystem solution designed for households and businesses seeking complete energy independence. Since both devices are developed by the same manufacturer, they ensure ideal mutual compatibility, fast data exchange response, and simple control via a single app. The system utilizes a high-voltage (HV) architecture, which allows for significantly higher efficiency and lower energy losses than conventional low-voltage systems.

Deye SUN-12K-SG01HP3-EU-AM2 three-phase hybrid inverter, 12 kW

Key features:

• Nominal power: 12 kW three-phase output.

• Battery voltage: 160 - 700 V; high-voltage system.

• Off-grid operation: the hybrid inverter can supply power autonomously.

• Quiet operation: <55 dB.

• 6 time periods for battery charging / discharging.

• Supports energy storage from a diesel generator.

• Up to 10 pcs. in parallel for on-grid and off-grid operation.

Technical specifications:

• Nominal output power: 12 kW.

• Phases: 3.

• Number of battery connection ports: 1.

• Efficiency: 97.6%.

• Protection class: IP65.

• Dimensions: 408 x 638 x 237 mm.

• Weight: 30 kg.

• Operating temperature: from -40 °C to +60 °C.

• Communication: RS485 / RS232 / CAN / Wi-Fi / LAN / 4G.

• Installation location: suitable for indoor and outdoor installation.

Deye energy storage system GB-L16 PRO, 16 kWh

The system features an integrated LCD screen for real-time monitoring of the battery charge status.

Technical specifications:

• Total capacity: 16 kWh.

• Number of modules: 4.

• Capacity of one module: 4 kWh.

• Nominal voltage of module: 102.4 V.

• Nominal voltage of system: 409.6 V.

• Recommended charge/discharge current: 20 A.

• Nominal current: 40 A.

• Number of cycles: ≥ 6000.

• Operating temperature: from -20 °C to +55 °C.

• Protection class: IP65.

• Dimensions: 540 x 385 x 1090 mm.

• Weight: 175 kg.

• Installation: floor-mounted.

Key advantages of the set:

• Maximum compatibility: Both devices are from the same manufacturer (Deye), so the BMS controller and inverter communicate flawlessly without additional compatibility accessories.

• High-voltage solution: Ensures fast charging / discharging and withstands high peak loads (e.g., when a heat pump starts or when charging an electric vehicle).

• Support (APVA): For the 16 kWh storage system, you can apply for a maximum subsidy of EUR 2,550 (15 kWh × EUR 170) under the separate call for energy storage systems.